SNC trailed seeder

Pneumatic seeding

SNC trailed seeder

Seed drills that due to their dimensions and weight have to be pulled by the tractor. They are used in LARGE FARMS and have large capacity hoppers . They are pneumatic seed drills that can be seed or seed and fertilizer.

Contact us

Features

  • Hopper of 6,000 and 7,500 liters, with access platform and selector screen.
  • Hydraulic support operator.
  • Adjustable ring hook.
  • Rear hitch bow 3 points for sowing train.
  • Panel with auxiliary sockets hydraulic and electric 12 V.
  • Central wheels with tires of flotation 550/60 R22,5 “.
  • Homocinetic PTO SHAFT TFT 540 r.p.m. in SNC COMB.
  • Volumetric pneumatic distribution system
  • Drive wheel dosing drive.
  • Cabin controller with 5 functions (Ha count, filling, rev counter, speedadvance, rpm alarm doser).
  • Approved lighting and signaling device.
  • LED rear work lights.
  • Seed rate weighing kit.

CNS SEM models

  • Single hopper.
  • Turbine with hydraulic motor (tractor oil).
  • 1 dispenser for fine and normal seeds.
  • 1 controller 5 functions.

SNC COMB models

  • Double hopper seeds/fertilicer (60% - 40%) with 70% - 30% posibility.
  • 2 turbines with hydraulic motor, with independent circuit.
  • 2 dispensers: one for fine and normal seeds, another for fertilizers (stainless steel).
  • 2 seed-fertilizer distribution heads.
  • 2 controllers 5 functions.

Standard equipment

Clear traces erasers SNC
Clear traces erasers SNC
Double rakes spring
Double rakes spring
Simple rake spring curved
Simple rake spring curved
SDR roller
SDR roller
Wheel 400
Wheel 400
Depth control wheel NC
Depth control wheel NC
SDR wheel arm
SDR wheel arm
Seed tube lock sensor
Seed tube lock sensor

SNC seeder (without sowing train)

Code Model Length (m) Width (m) Height (m) Hopper (L) Weight (kg) P.V.P.
Seed Fertilizer
1021050002SNC 6000 SEM5,752,552,96.000-2.52029.090 €
1021050001SNC 6000 COMB5,752,552,93.6002.4002.69040.400 €
1021050004SNC 7500 SEM5,752,553,27.500-2.70029.730 €
1021050003SNC 7500 COMB5,752,553,24.4003.1002.87041.150 €

Sowing train with disc and tines for SNC seeders

TNR sowing train with tines - Conventional sow

Code Model Arms Width (m) Weight (kg) P.V.P.
Number Separation (cm) Work Transport
1021050042TNR 500-4-404012,55,003,001.17014.100 €
1021050043TNR 600-4-4040156,003,001.22014.470 €
1021050044TNR 600-4-484812,56,003,001.25015.670 €
1021050045TNR 700-4-484814,57,003,001.41016.140 €

Features of the
TNR sowing train:

  • Separation between rows: 30 cm.
  • Plougshare of one-point.
  • Clearance under chassis 52 cm.
  • Spring security.
  • Two pneumatic wheels 195/55-R10C control of depth in sowing train

TND single disc train - Conventional sow

Code Model Arms Width (m) Weight (kg) P.V.P.
Number Separation (cm) Work Transport
1021050039TND 500-404012,553128015.790 €
1021050040TND 600-484812,563147016.360 €
1021050041TND 700-484814,573158018.810 €

Features of the
TND sowing train:

  • Separation between rows: 31 cm.
  • Clearance under chassis 53 cm.
  • Independent arm regulation.
  • Two pneumatic wheels 195/55-R10C control of depth in sowing train

Note: Not suitable for install on SNC-COMB models.

Direct sow trains for SNC seeders

TDL sowing train with tines - Direct sow

Code Model Arms Width (m) Weight (kg) P.V.P.
Number Separation (cm) Work Transport
1021060045TDL 500-4-343414,75,003,001.33016.230 €
1021060046TDL 600-4-4040156,003,001.38018.180 €
1021060047TDL 700-4-484814,57,003,001.55020.450 €

Features of the
TDC sowing train:

  • Separation between rows: 40 cm.
  • TInes 12 mm.
  • Clearance under chassis 56 cm.
  • Spring Security
  • Reinforced grilles with tungsten carbide inserts.
  • Detachable arm grating sowing (no need to change the arm when the grate has worn out).
  • Two pneumatic wheels 195/55-R10C control of depth in sowing train
  • Adjustable arm for SNC seed drill tread.

TDR sowing train with tines - Direct sow

Code Model Arms Width (m) Weight (kg) P.V.P.
Number Separation (cm) Work Transport
1021060048TDR 500-4-3131165,003,001.64017.830 €
1021060050TDR 600-4-4040156,003,001.69020.200 €
1021060051TDR 700-4-484814,57,003,001.90023.100 €

Features of the
TDC sowing train:

  • Separation between rows: 47 cm.
  • Tines 20 mm.
  • Clearance under chassis: 61 cm.
  • Spring Security
  • Reinforced grilles with tungsten carbide inserts.
  • Detachable arm grating sowing (no need to change the arm when the grate has worn out).
  • Two pneumatic wheels 195/55-R10C control of depth in sowing train
  • Adjustable arm for SNC seed drill tread.

TDC sowing train with tines - Combined direct sow (only SNC COMB models)

Code Model Arms Width (m) Weight (kg) P.V.P.
Number Separation (cm) Work Transport
1021060053TDC 500-3-2424215,003,00180020.040 €
1021060052TDC 600-3-2929216,003,00199023.250 €
1021060054TDC 700-3-343420,57,003,00224025.590 €

Features of the
TDC sowing train:

  • Separation between rows: 80 cm.
  • Clearance under chassis: 61 cm.
  • Removable 12 mm plow shares with tungsten carbide inserts.
  • Spring safety with parallelogram regulation.
  • Seed and fertilizer outlet in independent furrows with adjustable spacing.
  • Two pneumatic wheels 195/55-R10C control of depth in sowing train.
  • Adjustable arm for SNC seed drill tread.

Options

Rollers for TDR sowing trains

Roller cage Ø 25 cm with 8 bars 20 mm
Code Model WORKING WIDTH (m) WEIGHT (Kg) P.V.P.
2021060022 TDR-500 5 300 1.810 €
2021060023 TDR-600 6 350 2.020 €
2021060024 TDR-700 7 390 2.180 €

Rakes

For model: Double rakes spring Ø 7 mm. 2 rows Simple rake spring curved Ø 9 mm 1 row
CodeWidth (m)KgP.V.P. CodeWidth (m)KgP.V.P.
SNC 500 20210500505210880 € 20210600175210880 €
SNC 600 20210500516270950 € 20210600186270950 €
SNC 700 202105005273201.080 € 202106001973201.080 €

Videos

Various Seeding Machines - SOLANO HORIZONTE
Various Seeding Machines - SOLANO HORIZONTE
SOLANO HORIZONTE : THE SNC7500 SEEDER
SOLANO HORIZONTE : THE SNC7500 SEEDER