Computers and controls for spraying
Spraying computer Geosystem 260 CS - Geoline
- Available in 5 or 7 spray patterns
- GPS antenna speed sensor as standard.
- LCD display.
- USB port.
- Configuration of up to 10 working treatments.
- Custom configuration of up to 8 EUR and ISO nozzles.
- Parameters that can be monitored: working pressure, working speed, flow rate, treated surface, quantity applied, treatment duration, distance traveled, tank level (some of these parameters are obtained by calculation, others by sensors).
BRAVO 180 S spraying computer - ARAG
- Wheel speed sensor (option: GPS antenna sensor).
- Configuration of up to 10 working treatments.
- Programming of a minimum working pressure below which work stops automatically
- Programming of minimum working speed below which the pressure valve is automatically cut off.
- Data visualization: dosage, working speed, working pressure (pressure sensor in option), applied volume, liquid level (simulated by calculation), treated surface, treatment duration, distance traveled.
BRAVO 180 S of 5 or 7 sections + 5 or 7 hydraulic functions
Optional: Speed sensor by GPS antenna
BRAVO 350 spraying computer - ARAG
Automatic closing of the general valve, section valves and variable application management when connected to Bravo400S / Delta80
USB port for data transfer and software update
Connection to GNSS receiver for speed calculation and recording of geo-referenced processing data
Possibility of remote connection via IOTBOX to manage data, alarms and controls
Input for external control of general valve
Inputs for signals of: flow rate, speed, pressure, tank level or filling flow meter, rpm
Outputs to control up to 7 boom sections, regulating valve, general valve and markers
Outlets to control up to 7 hydraulic functions and relief valve
BRAVO 350
BRAVO 350 with hydraulic functions
BRAVO 400 S LT spraying computer - ARAG
It integrates all the functions of liquid distribution management and navigation, without the need for an external ECU.
It offers the same functions as the BRAVO 400S, with great simplicity of installation and an excellent price/performance ratio.
Management of automatic section closure
Predisposed for connection to automatic driving system
Variable application management through prescription maps
Control of up to 7 water and oil sections
Compatible with the full range of Arag GPS receivers
Only for controls with 3-wire valves - 863 and 873 Series
BRAVO 400 S Spray Computer - ARAG
2 GB internal memory
5.7'' TFT screen
2 USB ports
SD card reader for job recording and software updates
GPS antenna with GLIDE technology, which reduces rapid trajectory deviations and improves inter-pass replenishment in case of DGPS signal loss
Calculation of positions using GPS, GLONASS, GALILEO and BEIDOU signals
Compatible with free SBAS correction signals (EGNOS, WAAS, MSAS...)
LED operation indicators for power supply, position available and differential correction available
Position update 10 times per second (10 Hz)
Guidance modes: parallel, curved, pivot and free-form
Landmark marking
Return to the point of treatment interruption
Re-alignment of the tracks
2D or 3D visualization
Adjustable zoom
BRAVO 400S with 7 sections + 9 hydraulic functions
BRAVO 400S of 8÷13 sections + 9 integrated hydraulic functions (sequential)
Hydraulic sections and functions
IOTBOX 4.0 control unit
IOTBOX is a control unit capable of collecting information from the implement used, connecting the agricultural machine to YConnect.
- YConnect is the Ynnova Cloud platform, which allows to remotely monitor, control and operate the fleet of machines.
Through YConnect and IOTBOX it is possible to send commands to the machine remotely, as well as download programs, maps, work parameters and more.
Precision farming - Isobus - Müller Elektronik
- GPS cut-off of sections
- Automatic height control
- Automatic lance
- Automatic steering
- Etc.