Spraying Computers

Downloads page »

Perform a query
05-PU-29-bravo-180-s05-PU-29-bravo-300-rcu05-PU-29-bravo-300-s05-PU-29-bravo-400-s-05-PU-29-bravo-180s-5-5

MODELS

BRAVO 180S COMPUTER (flow is electronically controlled so as to vary proportionally to working speed in order to maintain the rate of L/ha; with speed sensor on wheel).

General features:

  • The computer automatically regulates the pressure according to the information that it receives from the speed sensor located on the wheel (in option: GPS speed sensor) and the flowmeter, in order to maintain the L/Ha volume set by the farmer. Can be run manually if necessary.
  • Datas that can be displayed: rate of application, speed, pressure, flow, sprayed volume, tank level, sprayed area, covered area, covered distance (consult us).
  • Possibility to save 10 working configurations.
  • The computer will automatically stop spraying when pressure fall under the minimum working pressure set by the user.
  • The general pressure electro-valve will be automatically shut-off when the working speed fall under the minimal working speed set by the user.
  • Visual and acoustic alarms.
  • Option: GPS speed sensor.

BRAVO 300S & 300S RCU COMPUTERS (flow is electronically controlled so as to vary proportionally to working speed in order to maintain the rate of L/Ha; with speed sensor on wheel).

General features:

  • The computer automatically regulates the pressure according to the information it receives from the speed sensor located on the wheel (in option: GPS speed sensor) and the flowmeter, in order to maintain the L/Ha volume set by the farmer. Can be run manually if necessary.
  • SD card to save information about the performed treatment, to save/load working configurations and to load software updates.
  • Graphic indicator of tank level.
  • Datas that can be displayed: instantaneous application rate, sprayed dosis, speed, pressure, flow, sprayed volume, tank level, sprayed area, duration of the treatment, productivity, date, hour, covered distance.
  • The computer will automatically stop spraying when pressure fall under the minimum working pressure set by the user.
  • The general pressure electro-valve will be automatically shut-off when the working speed fall under the minimal working speed set by the user.
  • Alarms: when preset application cannot be reached, low level in tank, mín/máx working pressure of nozzles, flowmeter out of operating range.
  • Possibility to increase/reduce momentarily the applied volume during the treatment (by +/-10% range).
  • Possibility to save 19 working configuration.

Technical features:

  • Integrated SD card reader, with protection cover.
  • Input for main valve outer control.
  • RS232 serial port for GPS connection.
  • Self-powered internal clock.
  • Input for signals of: flow rate, speed, pressure, filling flow rate, revolution counter, pump protector – NOTA: some of these sensors are in option.
  • Output to control up to 7 sections of booms, control valve, main valve and foam marker.
  • Available languages: Italian, English, French, Portuguese, Spanish, Czech, Russian, German and Polish.
  • Available units of measurement: international system (ha, km/h) ou USA system (Ac, Mph).
  • Graphic backlit display – 240×73 pixels.
  • Power supply 12Vcc.
  • RCU only: integrated control for 7 or 9 hydraulic functions.
  • Option: GPS speed sensor.

Options FOR SPRAYING COMPUTER BRAVO 180S, 300S and 300 RCU

  • GPS SPEED SENSOR ANTENNA:
  • Datas updated 4 times per second (4Hz).
  • SBAS differential correction (Egnos, Waas, Msas).
  • Power supplied by BRAVO computer.
  • Length of cable of connection de 4 metres.
  • Magnetic support bracket.

SPRAYING COMPUTER BRAVO 400S (flow is electronally controlled to be proportional to speed, opening/closing of spraying sections is automatically controlled through GPS).

05-PU-29-bravo-400-s-05-PU-29-bravo-400-s-0205-PU-29-bravo-400-s-0305-PU-29-bravo-400-s-0405-PU-29-bravo-400-s-05

General features:

  • Automatic regulation through the information sent by the GPS antenna and by the flowmeter to the computer, to maintain a constant L/Ha volume of application rate. Possibility to work in manual position.
  • Available configurations: 5 spraying sections + 7 hydraulic functions, or 7 spraying sections + 9 hydraulic functions.
  • Available modes: parallel, curved, pivto and free areas.
  • Automatic opening/closing of spraying sections by GPS system.
  • 2 USB ports, SD card reader, 2 Gb internal memory.
  • Display TFT, high resolution.

Downloads for this product:

Downloads page »

Contact / Find your dealer:

For further information, please contact us at (+34) 968 38 01 13 or fill out the form below:

Perform a query